Modeling basin-scale internal waves in a stratified lake

by Ben R. Hodges, Jörg Imberger, Angelo Saggio, and Kraig B. Winters

Citation: Hodges, B. R., J. Imberger, A. Saggio, and K. B. Winters, "Modeling basin-scale internal waves in a stratified lake." Limnology and Oceanography 45:(7):1603-1620, (2000).

Abstract

Basin-scale internal waves provide the driving forces for vertical and horizontal fluxes in a stratified lake below the wind-mixed layer. Thus, correct modeling of lake mixing and transport requires accurate modeling of basinscale internal waves: examining this capability with a hydrostatic, z-coordinate three-dimensional (3D) numerical model at coarse grid resolutions is the focus of this paper. It is demonstrated that capturing the correct thermocline forcing with a 3D mixed-layer model for surface dynamics results in a good representation of low-frequency internal wave dynamics. The 3D estuary and lake computer model ELCOM is applied to modeling Lake Kinneret, Israel, and is compared with field data under summer stratification conditions to identify and illustrate the spatial structure of the lowest-mode basin-scale Kelvin and Poincare´ waves that provide the largest two peaks in the internal wave energy spectra. The model solves the unsteady Reynolds-averaged Navier–Stokes equations using a semi-implicit method similar to the momentum solution in the TRIM code with the addition of quadratic Euler–Lagrange discretization, scalar (e.g., temperature) transport using a conservative flux-limited approach, and elimination of vertical diffusion terms in the governing equations. A detailed description is provided of turbulence closure for the vertical Reynolds stress terms and vertical turbulent transport using a 3D mixed-layer model parameterized on wind and shear energy fluxes instead of the convential eddy viscosity/diffusivity assumption. This approach gives a good representation of the depth of the mixed-layer at coarse vertical grid resolutions that allows the internal waves to be energized correctly at the basin scale.

<pdf of first page>

©2003 Ben R. Hodges • last updated August 16, 2003

UT College of EngineeringDept of Civil EngineeringCRWREFM Home