ARC HYDRO GROUNDWATER Tutorials

Wells and Time Series

Provided by Courtes= y of Gil Strassberg and Norman Jones of Aqu= aveo http://www.aquaveo.com/

Arc Hydro Groundwater (AHGW) is a geodatabase design for representing groundwater datasets within ArcGIS. The data model helps to archive, di= splay, and analyze multidimensional groundwater data, and includes several compone= nts to represent different types of datasets, including representations of aqui= fers and wells/boreholes, 3D hydrogeologic models, temporal information, and data from simulation models.

The Arc Hydro Groundwater Tools= help to import, edit, and manage groundwater data stored in an AHGW geodatabase.= This tutorial illustrates how to u= se the tools to manage well data and time series data (transient water level measurements) associated with wells. A basic familiarity with the AHGW data model is suggested, but not required, prior to beginning this tutorial.

<= span style=3D'mso-bookmark:_Toc361455681'>1.1 Outline

In this tutorial, we will be working with groundwater data from the Panhandle region of Texas. We will comp= lete the following tasks:

1.&n= bsp; Import a set of well data into ArcGIS.

2.&n= bsp; Modify the well attributes.

3.&n= bsp; Generate time series plots of water level data.

4.&n= bsp; Generate average water level maps for selected peri= ods.

5.&n= bsp; Build a geoprocessing model to automate running a t= ool.

6.&n= bsp; Generate a flow direction map.=

<= span style=3D'mso-bookmark:_Toc351172011'>1.2 Required Modules/Interfaces

You will need the following components enabled in order to complete this tutori= al:

· Arc Info / Arc View

· Spatial Analyst

· Arc Hydro Groundwater Tools

· AHGW Tutorial Files

The AHGW Tools requires that you have a compatible ArcGIS service pack installed. You may wish to ch= eck the AHGW Tools documentation to find the appropriate service pack for your version of the tools. Spatial Analyst is required for one portion of the tutorial involving interpolation. If you do not have Spatial Analyst, you can skip that portion of the tutorial. The tutorial files should be downl= oaded to your computer and saved on a local drive.

2 = ; Getting Started

Before opening our map, let’s ensure that the AHGW Tools are correctly configured.

1. If necessary, launch ArcMap.

2.&n= bsp; If necessary, open the ArcT= oolbox window by clicking on the ArcToolbox icon .

3.&n= bsp; If you have not already done so, add the AHGW Toolbox by right-clicking any= where in the ArcTool= box window and selecting the Add Toolbox… command. B= rowse to the C:\Program Files\Aquaveo\Arc= Hydro Groundwater Tools directory and select and open the Arc Hydro Groundwater Tools.tbx file.

4.&n= bsp; Expand the = Arc Hydro Groundwater Tools item and then expand the Groundwater Analyst toolset to expose the tools we will be usin= g in this tutorial.

Note that many of the GP tools in the AHGW Toolbox can also be accessed f= rom the AHGW Toolbar. The toolbar contains additional user interface components not available in the toolbox.= If the toolbar is not visible, do = the following:

5.&n= bsp; Right-click on any visible toolbar and select the Arc Hydro Groundwater Toolbar item= .

3 = Opening the Map

We will begin by opening a map contain= ing county boundaries for the Panhandle region of North Texas.

1.&n= bsp; Select the = File | Open command and browse to the location on your local drive where you h= ave saved the AHGW tutorials. Bro= wse to the Groundwater Analyst | wells and= time series folder and open the file entitled lubbock_wells.mxd.

Once the file has loaded you will see = a map of the Panhandle region of North Texas.<= span style=3D'mso-spacerun:yes'> The filled polygon represents the boundary of the Ogallala aquifer in Texas. This data was obtained from the Texas Water Development Board Groundwa= ter Database (http://www.twdb.state.tx.us/publications/reports/groundwaterr= eports/gwdatabasereports/gwdatabaserpt.htm).

4 = ; Creating a new AHD File

Before cont= inuing, we need to create an Arc Hydro Document (AHD) file. This file should be created each t= ime a new map document is created for an Arc Hydro project. This file is used by the AHGW tool= s to save settings, file names, and other user selections in order to streamline= the user experience. For example,= when a geoprocessing tool is executed, the selections made by the user are saved= to the AHD file and presented as defaults the next time the tool is launched.<= /span>

1. Double-click on the Create Arc Hydro GW Configur= ation tool located in the Arc Hydro Groun= dwater Tools | Arc Hydro Groundwater Setup toolbox.

2. For both the Raster Location Workspace<= /i> and the Vector Location Dataset options, click on the Open butt= on and browse to the folder containing= the files for this tutorial. Sele= ct the Rasters folder for the Raster Location Workspace and select the Data Feature Dataset for the Vector Location Dataset.

3.      Enter Layers for the project name and click on the Open button and enter <= b>Lubbock_Wells.ahd for the Arc Hydro Document. A= t this point, your selections should be similar to those shown in Figure 1.

4.      Select the OK button to execute the to= ol.

5.      Select the Close button when the tool = has finished.

F= igure 1     = ;    Settings for the Create Arc Hydro Groundwate= r Configuration Tool.

5      =        Importing the Well Data

Next, we wi= ll import the well data for = Lubbock County. The well data has been downloaded = from the above-referenced website to a comma-delimited text file. The AHGW Toolset includes a tool f= or automating the import of text data into the AHGW geodatabase.

1.      In the AHGW Toolbar, select the Arc Hy= dro GW | Text Import command.

2.&n= bsp;     In the well= s and time series folder, select and open the lubbock_well_data.txt file.

3.&n= bsp;     At the top of the File Import Wizard, turn on the= Comma toggle and turn off the Space toggle in the col= umn delimiters section.

4.&n= bsp;     Turn on the Treat consecutive delimiters as one toggle.

5.&n= bsp;     Turn on the Heading row toggle. This indicates that the first row contains headers for the data.

At this poi= nt, the dialog should look like the example shown in Error! Reference source not found.Figure 2.

F= igure 2     = ;    File Import Wizard, Step 1 of 2.<= /p>
6.      Select the Next button to go to the ne= xt step of the wizard.

In the next= step of the wizard we indicate the type of data we are importing and specify how ea= ch of the columns in the file is linked to fields in the target feature class = (Well in this case). The contents of the file are shown= in the table at the bottom of the dialog.&nbs= p; For each column that we wish to import, we will select the appropria= te field name in the Type row. By default, <not mapped> is selected for each column indicating that = the column will not be imported to a field in the Well feature class.

7.      Make sure that the Well option is selected in the Create Features/Row= s in: combo box.

8.      In the first column with a Header = value =3D “sta= te_well_number”, double-click on the <not mapped&= gt; item in the Type row, and selec= t HydroCode.

9.      Repeat the previous step to create the following relationships (you will need to scroll to the right to see some of the fields):

Header

Type

lat_dec=

Y

long_de= c

X

aquifer_id1

AquiferCode

elev_of= _lsd

Elevation

well_ty= pe

FType

well_de= pth

Depth

10. Selec= t the Finish button to complete the impo= rt process.

11. Selec= t OK to confirm the import process.<= /span>

At this poi= nt, you should see some wells appear in the map.&n= bsp;

Before cont= inuing, let’s zoom in on the wells.

12. Selec= t the Zoom In tool and drag a box around the wells.

6      =        Using the Feature Type Filter

Features su= ch as wells include an FType field representing the feature type. For wells, this field is often pop= ulated with values such as “irrigation”, “municipal”, etc. The AHGW Toolbar include= s a pair of filters than can be used to map only the features in a layer that correspond to a particular type. The Filter creates a simple definition query for the selected value = (for example, FType =3D ‘irrigation’). The Texas Water Development Board = uses single character codes to identify well types. The four codes used in the wells i= n Lubbock County are O, S, T, and W and represent= the following well types:

Code

Well Type<= /b>

O

Observation

S

Spring

T

Test hole

W

Withdrawal

=

Before usin= g the filter, we will first change the symbology so that the wells are colored by type.

1.   &n= bsp; Right-click on the Well layer and select the Properties command.

2.   &n= bsp; Click on the Symbology tab in the Layer Properties dialog, and change the selected options to match those shown= in Figure 3 (Change the Show: option to Catego= ries | Unique values. Choose FType as the value field and clic= k the Add All Values button.).

F= igure 3     = ;    Symbology Options for the Well Features.=

3.   &n= bsp; Click the O= K button to exit.

Notice that= most of the wells are withdrawal (W) wells. To map wells by type using the Filter:

4.      Make sure the Well layer is selected= in the ArcMap Table of Contents (TOC). The filter will be built for the selected layer.

5.      Click on the down arrow in the first combo box just to the right of the Field label on the right side of t= he AHGW Toolbar and select FType.

6.      Click on the down arrow in the second combo box to the right of the Field label and select W.&n= bsp; (note: this sets up a new definition query for the selected layer and overwrites any existing definition queries)

7.   &n= bsp; Repeat the previous step for each of the other type= s.

8.   &n= bsp; When finished, select the All option to map all wells= .

Note that t= he two Field filters can be used to set u= p a definition query for any field/value combination for any map layer.<= /p>

7      =        Assigning HydroIDs

Each featur= e in an Arc Hydro geodatabase should have an identifier that is unique across the entire geodatabase, not just within a feature class. This unique ID is called the HydroID. The HydroID is used = to build relationships between feature classes and/or tables. For example, we will use the Hydro= IDs of the wells to relate the wells to the corresponding water level measurements= in the TimeSeries table.

In a typical project, one would normally use the Assign HydroID tool in the Arc Hydro To= ols to generate unique HydroIDs for new features.= This tool necessitates some additional steps to relate the wells to = the time series data we will import in the next step. Therefore, in order to keep this tutorial exercise simple we will copy over the values in the HydroCode fiel= d to the HydroID field. This will = result in unique integer IDs for this exercise.&n= bsp; To copy the values:

1.   &n= bsp; Right-click on the Well layer in the ArcMap Table of Contents window and select Open Attribute Table.

2.   &n= bsp; Right-click on the HydroID field and select the Field Calculat= or command. Click Yes to get past the warning= (if necessary).

3.   &n= bsp; In the Fiel= ds section of the Field Calculator, double-click on the HydroCode i= tem.

4.   &n= bsp; Select the = OK button.

5.   &n= bsp; Close the Attributes window.

8      =        Importing the Time Series Data

Now that we= have imported the well features, we are ready to import the transient water level measurements into the TimeSeries table. Each record in the tab= le will represent a water level measurement at a particular well at a particul= ar time. The records in the TimeSeries table will be related t= o the wells using the HydroID field.

Once again,= we will use the Text Import Wizard to i= mport the data.

1.      In the AHGW Toolbar, select the Arc Hy= dro GW | Text Import command.

2.      In the wells and time series folder, select and open the lubbock_water_levels.txt file.

3.   &n= bsp; As before, turn off the Space toggle, turn on the Comma toggle, turn off the = Treat consecutive delimiters as one toggle, and turn on the Heading row= toggle as shown in Figure 4.

Figure 4      =    File Import Wizard Settings, Step 1.

4.   &n= bsp; Select the = Next button.

5.   &n= bsp; Make sure that the TimeSeries option is selected in the Create Features/Rows in: combo box.

6.   &n= bsp; Double-click on the <not mapped> items in the Type row and create the following relationships as shown in Figure 5:

Header

Type

state_w= ell_number

FeatureID

depth_f= rom_lsd

TSValue

Date_Ti= me

TSDateTime

7.   &n= bsp; Click Finis= h to exit the wizard.

8.   &n= bsp; Click OK to confirm the import.

F= igure 5     = ;    Import Wizard Settings, Step 2.

9      =        Fixing the TimeSeries Table

The water l= evel measurements are stored in the TimeSeries table. Let’s open the table and vie= w the contents.

1.   &n= bsp; Click on the Source tab at the bottom of the Table of Contents (TOC) window.

2.   &n= bsp; Right-click on the TimeSeries table and select Open.
Notice that= two of the fields contain null values. We can populate these fields using the Field Calculator. First, we will populate the TSType= ID field. This field is typicall= y used to identify the type of time series and is an index to a separate TSType table. The TSType table includes a record for e= ach of the different types of time series stored in the TimeSeries table (e.g. “Water level measurement”, “TCE Concentration”, etc= .) and provides information about the units of measurements. To keep this exercise simple, we w= ill not be using a TSType table and we will just ha= ve one type of measurement in our table (water level).

1.   &n= bsp; Right-click on the TSTypeID field in TimeSeries table and s= elect the Field Calculator command.

2.   &n= bsp; Click Yes if necessary at the warning about an edit session.

3.   &n= bsp; In the bottom part of the Field Calculator, enter 1.

4.   &n= bsp; Click OK to exit the Field Calculator.

Next, we wi= ll make an adjustment to the water level measurements in the TimeSeries table. The water levels we imported to the TSV= alue field are actually depths measured from the top of the well and are expressed as negative values. To get a field representing actual elevations, we will use the field calculator and add the negative depths to= the well elevations. This will re= quire a temporary join. We will put= the adjusted elevation values into a field called TSValue_normalized.<= /p>
First, we w= ill do the join.

5.   &n= bsp; Close the T= imeSeries table.

6.      Right-click on the TimeSeries table and sel= ect Joins and Relates | Join…

7.      Select the join options shown in Figure 6.

8.   &n= bsp; Click on the OK button to complete the join.

F= igure 6     = ;    Join options for joining Well features to the TimeSeries table.

Next, we wi= ll compute the proper elevations.

9.      Right-click on the TimeSeries table and sel= ect the Open command.

10. Right= -click on the TimeSer= ies.TSValue_normalized field and select the Field Calculat= or command.

11. Click= Yes at the= prompt (if necessary).

12. Enter= the expression shown in Figure 7 in the bottom part of the Field Calculator.

13. Click= OK to complete the operation.

14. Click= Yes at the= prompt (if necessary).

15. Close= the TimeSeries Table.

F= igure 7     = ;    Computing a normalized elevation for the wat= er level measurements.

Finally, we= will remove the join.

16. Right= -click on the TimeSeries table and sel= ect Joins and Relates | Remove Join(s) | Well.

10<= span style=3D'font:7.0pt "Times New Roman"'>      =    Finding Wells with Transient Data

Some of the= wells imported have transient water level measurements and some do not. We can quickly determine which wel= ls have transient data using the Make = Time Series Statistics tool in the Groundwater Analyst toolset. This tool can be used to derive a = new feature set from an existing feature set with transient data. The new feature set includes a fie= ld representing selected statistics of the original transient data (mean, stan= dard deviation, etc.). In this cas= e, we will use the tool to derive a new layer containing only the wells with transient data and with a field representing the average water level over a= ll measurements.

1.   &n= bsp; Double-click on the Make Time Series Statistics tool in the AHGW Toolbox | Groundwater Analyst toolset.

2.   &n= bsp; Enter the input options/selections as shown in Figure 8.&nbs= p; For the Output Feature Class= option, browse to the location on your local drive where the tutorial files= are located and open the Lubbock_wells geodatabase so that the new features are created inside the geodatabase. Type water_level_all as the = name of your new feature class.

3.   &n= bsp; Click OK to execute the tool.

4.   &n= bsp; Once the tool has completed its processing, select = the Close button to close the GP windo= w.

F= igure 8     = ;    Input options for the Make Time Series Statistics tool.

You should = now see a new set of wells displayed on the map.

11<= span style=3D'font:7.0pt "Times New Roman"'>      =    Adjusting the Well Display

In addition= to the mean water level, the Make Time Ser= ies Statistics tool generates a new field containing the frequency of measurements (i.e., the number of transient water level values per well). We can use the ArcMap Symbology to= map the sampling frequency.

1.   &n= bsp; Click on the Display tab at the bottom of the TOC window.

2.   &n= bsp; Uncheck the Well layer to hide that layer. Only well= s with transient data will still be visible in the map.

3.   &n= bsp; Right-click on the water_level_all layer and s= elect the Properties command.<= /p>
4.   &n= bsp; Edit the selection in the Layer Properties dialog to match what is shown in Error! Reference source not found..&nbs= p; Change the Show: option = to Quantities | Graduated Colors; ch= ange the Value: field to FREQUENCY and change the Classes setting to 4. To change the = symbol sizes, double-click on each of the symbols and edit the Size value. Use 4= .0 for the smallest symbol and 6.0, 8.0, and 10.0 for the three larger symbols.

5.   &n= bsp; Click OK to exit.

= Figure 9         Symbology settings for the water level frequ= ency data.

12<= span style=3D'font:7.0pt "Times New Roman"'>      =    Using the Time Series Grapher

When workin= g with transient well data, it is helpful to generate graphs illustrating the chan= ge in water level vs. time. The = AHGW Toolbar includes an interactive Tim= e Series Grapher tool that can be used to quickly generate time series graphs si= mply by clicking on wells of interest. We will use this tool to explore the Lubbock county well data.

1.   &n= bsp; Click on the Time Series Grapher icon in the AHGW Toolbar.

2.   &n= bsp; Edit the options in the Time Series Grapher Setup dialog to match those shown in Figure 10.

F= igure 10    &nbs= p; Time Series Grapher Setup Options.

3.   &n= bsp; Select OK to exit the Setup dialog.

Notice that= the cursor has changed. We can now create a new graph simply by clicking on wells.

4.   &n= bsp; Click on one of the light blue wells.

A new plot = window should appear. You may wish to reposition the window. You can right-click on the graph to modify the plot using the standard graphing options.

5.   &n= bsp; Click on a second light blue well.

Note that subsequent well data are inserted as additional series to the current graph= . To create a new graph, you can sim= ply close the current graph and click on a new set of points. Each graph is stored with the map = and can be re-opened using the Tools | = Graphs menu command.

6.   &n= bsp; Click on the Select Features tool to deactivate the Time Series Grapher tool.

13<= span style=3D'font:7.0pt "Times New Roman"'>      =    Time Series Statistics for a Specific Time I= nterval

Earlier in = this tutorial, we used the Make Time Ser= ies Statistics tool to derive a new feature class representing the average water levels over the entire set of measurements. The objective of that exercise was simply to identify the wells containing transient water level measurements.= Next, we will use the Make Time Series Statistics tool to derive a set of features corresponding to mean water levels measured over a specific interval in time (first quarter of the year 2000). Then we will interpolate these val= ues to a raster to generate a map of water levels for the county for our selected = time interval.

1.   &n= bsp; Double-click on the Make Time Series Statistics tool in the AHGW Toolbox | Groundwater Analyst.

2.   &n= bsp; Enter the input options/selections as shown in Figure 11.&nbs= p; For the Output Feature Class= option, browse to the location on your local drive where the tutorial files= are located and open the Lubbock_wells geodatabase. Type wl_q1_2000 as= the name of your new feature class.

3.   &n= bsp; Click OK to execute the tool.

4.   &n= bsp; Once the tool has completed its processing, select = the Close button to close the GP windo= w.

F= igure 11    &nbs= p; Input options for the Make Time Series Statistics tool.

You should = now see a new set of wells displayed on the map.&n= bsp; To simplify the map display:

5.   &n= bsp; Turn off the water_level_all layer in the TOC window.

14<= span style=3D'font:7.0pt "Times New Roman"'>      =    Interpolating Water Levels

The next st= ep is to interpolate the values from the new layer to a raster to generate a map of water levels for Q1 of 2000. = This step requires Spatial Analyst.<= span style=3D'mso-spacerun:yes'> If you do not have Spatial Analyst installed, you will not be able to complete the remainder of this tutorial. W= e will use the IDW geoprocessing tool = to perform the interpolation and we will set the Environment options such that the resulting raster is clipped to the Lubbock County boundary.

1.   &n= bsp; Double-click on the IDW tool in ArcToo= lbox (located in the Spatial Analyst Too= ls | Interpolation).

2.   &n= bsp; Enter the set of options shown in Figure 12.&nbs= p; For the Output raster op= tion, change the name of the output raster to q= 1_2000. Be sure to set the location of the raster such that it is in the folder one level above the geodatabase (i.e., just outside the geodatabase). This ensures that the next step will not result in an error.<= /p>

F= igure 12    &nbs= p; Input Setting for the IDW GP Tool.

3.   &n= bsp; Click on the Environments… button.

4.   &n= bsp; Expand the = General Settings section and change the Extent option to Same as layer lubbock_county. This will cause the interpolation = to extend out the limits of a rectangle including all of Lubbock County.

5.   &n= bsp; Scroll down and expand the Raster Analysis Settings section and change the Mas= k option to lubbock_county. This will clip the raster to the a= ctual boundary of Lubbock County.

6.   &n= bsp; Select the = OK button to exit the Environment Sett= ings dialog.

7.   &n= bsp; Select the = OK button to execute the IDW tool.=

8.   &n= bsp; When the tool has finished, click on the Close button.

9.   &n= bsp; You should see a new map layer called q1_2000 at the bottom of the TOC window. To make it visible on= the map, drag it up just above the Coun= ties layer.

15<= span style=3D'font:7.0pt "Times New Roman"'>      =    Using a Raster Catalog

Now that we= have a water level raster, we will store it in a raster catalog. This allows us to archive the rast= er with the time interval (start date, end date) and other descriptive informa= tion that may be useful. Furthermo= re, a sequence of rasters in a raster catalog can be animated using the Animation tools in ArcMap. A raster can be archived in a rast= er catalog using the Add to Raster Ser= ies tool in Groundwater Analyst. Since our geodatabase already contains an empty raster catalog with = the appropriate fields, we are ready to run the tool.

1.   &n= bsp; In ArcToolbox, Double-c= lick Arc Hydro Groundwater Tools | Groundwater Analyst | Add to Raster Series.

2.   &n= bsp; Enter the set of options shown in Figure 13.

F= igure 13    &nbs= p; Settings for the Add to Raster Series Tool.

3.   &n= bsp; Click on the OK button to execute the tool.

4.   &n= bsp; Click on the Close button once the tool has completed.

You should = see a RasterSeries layer added to the ma= p and a grayscale version of the raster is displayed. You can right-click on the RasterSeries layer and edit the symbology to select a new color ramp if you wish. To view the contents of the raster catalog:

5.   &n= bsp; Right-click on the RasterSeries layer and select the Open Attribute= Table item.

6.   &n= bsp; Scroll to the right to examine the fields.
7.   &n= bsp; When you are finished, close the window.

16<= span style=3D'font:7.0pt "Times New Roman"'>      =    Creating a Model to Automate Processes

Since gener= ating water level maps for a specific time interval is such a common procedure, i= t is useful to build a model that automates parts of the process. In this section you will build a m= odel that enables automating the process of running the Make Time Series Statistics tool. It is possible to create fairly complex models (and scripts) to automate common tasks. Some examples are provided in the Sam= ple Utilities toolset of the Arc Hydro Groundwater Tools.

1.      In Arc Toolbox select the Groundwater Analyst toolbox, right click and select New Model. A new empty model should open in the map. <= /p>
2.&n= bsp;     Drag the Make Time Series Statistics tool in= to the model.

You can exp= ose tool parameters as model parameters. In this example we will set the input featu= re classes, tables, and fields as constants and only expose the start date, end date, and output features as model parameters.

3.&n= bsp;     Select the Make Time Series Statistics tool = in the model, right click and select Make Variable | Fr= om Parameter | Start Date. The Start Date parameter should appear in the m= odel as a circle

4.&n= bsp;     Do the same to add the End Date parameter to= the model

5.&n= bsp;     Select the Stat Date parameter, right click,= and select the Model Parameter option. A “P” should appear beside the Start Date parameter. Do the same for the End D= ate parameter. You model should look like the one shown in Figure 14. Save your model.

F= igure 14    &nbs= p; Creating a model including the Make Time Series Statistics tool

Next, you w= ill set the other tool parameters.

6.&n= bsp;     Double click on the Make Time Series Statistics<= /i> tool in the model. This should expose the tool parameters.

7.&n= bsp;     Fill in the tool parameters as shown in Figure 15.

F= igure 15    &nbs= p; Make Time Series Statistics parameters

=

8.&n= bsp;     Save the model and close it and then reopen it from= the toolbox (by double clicking on the model) you will see only the Start Date,= End Date, and Output Features parameters exposed as input parameters. The rest = of the parameters are defined in the model and will remain constant.

9.&n= bsp;     Set the Start Date to 1/1/2001= and the End Date to 3/31/2001.

10.&= nbsp; Set the Output Feature Class by browsing to the lub= bock_wells geodatabase and name the new feature class wl_q1_2001.=

= Figure 16      Make Time Series Statistics parameters expos= ed as model parameters.

11.&= nbsp; Select OK to run the model.

A new layer= should be added to the map representing the mean water level for the first quarter= of 2001.

If you want= to run this process for multiple years you can batch process the model.

12.&= nbsp; Right click on the model and select Batch.

13.&= nbsp; Specify the input parameters as shown in Figure 17. By running the model in batch mode y= ou will create a new feature class for the first quarter of each year from 200= 2 to 2005 (to add a new row to the batch grid you simply select the icon).

14.&= nbsp; Select OK to run the model.

F= igure 17    &nbs= p; Model parameters in batch mode

By creating= more complex models and scripts you can automate the process of creating water l= evel maps and generate a sequence of maps for different time periods. These maps could then be animated using the Animation tool. See the Arc Hydro Groundwa= ter Tools | Sample Utilities and Arc Toolbox | Samples for sample models and scripts.

17<= span style=3D'font:7.0pt "Times New Roman"'>      =    Generating a Flow Direction Map

As the fina= l step of the tutorial, we will generate a flow direction map using the Flow Direction Generator command i= n the AHGW Toolbar. This tool generates = a set of flow arrows on top of a water level raster. The arrows are generated as graphic elements and can be managed/deleted using the standard ArcMap drawing tools. The arrows are generat= ed such that they point in the direction of maximum downward gradient in the w= ater level elevations (i.e. “downhill”).

To generate= the map:

1.      Turn off the RasterSeries map layer.=

2.      Select the q1_2000 raster in the TOC w= indow.

3.      In the AHGW Toolbar, Select Arc Hydro = GW | Flow Direction Generator.

4.      Enter a value of 7 for the Arrow Spacing.

5.      Click on the Generate button.<= /p>
At this poi= nt, the arrows should be added to the raster. To experiment with the settings, you can click the Clear button to remove the current arrows and Generate to build new arrows.

6.      Click on the Quit button when you are= finished.

18<= span style=3D'font:7.0pt "Times New Roman"'>      =    Conclusion

This concludes the tutorial. Here are some of the key concepts = in this tutorial:

·         The = Text Import Wizard is used to quickly import wells and time series data into= an AHGW geodatabase.

·         The = Make Time Series Statistics tool is used to identify wells with transient da= ta and to illustrate the frequency of the data.

·         The = Time Series Grapher is used to explore transient data.

·         The = Make Time Series Statistics tool is used to map statistics (e.g. mean, min, = max) values for a specific time intervals. This output can then be interpolated to a raster to generate water l= evel maps.

·         Raster catalogs are useful for managing rast= er series.

·         Models are used to automate processes.

·         The = Flow Direction Generator can be used to create a map of flow directions.

Header	Type
lat_dec=	Y
long_de= c	X
aquifer_id1	AquiferCode
elev_of= _lsd	Elevation
well_ty= pe	FType
well_de= pth	Depth

Code	Well Type<= /b>
O	Observation
S	Spring
T	Test hole
W	Withdrawal

Header	Type
state_w= ell_number	FeatureID
depth_f= rom_lsd	TSValue
Date_Ti= me	TSDateTime