Exercise 2. Building a Base = Map of the San Marcos Basin

CE 394K GIS in Water Resourc= es
University of Texas at Austin
Fall 2008

Pre= pared by David R. Maidment and Kate Marney

Selecting the San Marcos Basin

Summary of items to be turned in

Goals of the Exercise

This exercise is intended for you to build a base map of geographic and streamflow data for a watershed using the San Marcos Basin in South Texas as an example. The base map comprises watershed boundari= es and streams from the National Hydrography Dataset Plus (NHDPlus). A geodata= base is created to hold all these primary data layers and a method for creating relationships inside the geodatabase is also illustrated. In addition, you = will create a point Feature Class of stream gage sites by inputting latitude and longitude values for the gages in an Excel table that is added to ArcMap and the geodatabase. The table is used to create an XY Event and a Point Feature Class. You also compare the locations of the San Marcos basin surface boundaries, and the Edwards aquifer subsurface boundaries. You’ll link to the US Geolog= ical Survey's Real Time data website in Texas, download some streamflow data and make a plot of a flow hydrograph from a gaging site on the San Marcos Basin= .

Computer and Data Requirements

To complete this exercise, you'll need to run ArcGIS 9.3 from a PC.

The HUC boundaries are a subdivision of the US made by the US Geological = Survey to show major and minor river basins. There are 2-, 4-, 6-, and 8-digit HUC boundaries, where the larger the number is the smaller the area. The HUC8 boundaries are the basic ones. Each of the 21 Hydrologic Regions in the US are shown below and for this exercise w= e will focus on Water Resources Region 12, which contains most of Texas.

The NHDPlus data for the United States can be downloaded over the intern= et:

NHDPlus http://www.horizon-systems.com/NHDPlus/

Get the NHDPlus data for Region 12:

http://www.horizon= -systems.com/NHDPlus/data.php

For = those ambitious students that would like the experience of downloading NHDPlus da= ta for themselves, follow the instructions in this section. Otherwise, skip ah= ead to the Procedure for the Assignment Section wher= e you will find a zipped file with all the necessary data.

Foll= ow the link to get NHDPlus data, and click on the Region 12 location in the map (or another region if you want a different area of the country). There you will download the following files and save them in a directory of your choosing:

- Region 12, Version 01_02, Catchment Shapefil= e

- Region 12, Version 01_01, Catchment Flowline Attributes

- Region 12, Version 01_01, National Hydrograp= hy Dataset

Don’t download the = grid files because they are not needed for this exercise and they are huge in si= ze.

After extracting the zipp= ed files, you should have something similar to the following:

Proc= edure for the Assignment

Logon to the computer of your choice and make a directory in your worksp= ace for this exercise. I've saved the needed files in the LRC class directory (= Civil5/LRC/Class/Maidment/giswr2008/Ex2/). They may also be downloaded as http://www.ce.utexas.edu/prof/maidment/giswr2008/Ex2/Sanmarcos.zip This file is 207 MB and the total file space used for this exercise is a li= ttle less than 1GB. If you donR= 17;t have this amount of file space available to you, get the smaller file http://www.ce.utexas.edu/prof/maidment/giswr2008/Ex2/SanmarcosGDB.zip and proceed to the section on Adding Attrib= utes to the Flowlines.

Unzip the file to get the following:

Creating a Geodat= abase

Open ArcCatalog and create = a new file geodatabase by right clickin= g the directory where the NHDPlus data is saved and selecting New/File Geodatabase <= /b>and name it SanMarcos.gdb.

Right click on the new geodatabase and select New/Feature Dataset.

Name the new feature dataset Basemap, and hit Next to set the projection and map extent.

Select Import from the choices in the menu displayed.

We will import the coordinate system, so select Import and then navigate to the NHDPlus data that was just downloaded. Select the nhdflowlines shapefile.

Hit Add to select this hori= zontal coordinate system. Hit Next and leave the Vertical Coord= inate system set at None.

Hit Next and leave the default XY Tolerances as they ar= e, then hit Finish to complete the specification of the spatial reference of the feature dataset. If you right click on the resulting Basemap feature dataset and open Propertie= s, and tab to XY Coordinate System, you’ll see the coordinate system is = GCS_North_America_1983. This means that the coordinate sys= tem is in geographic coordinates using the North American Datum of 1983.

Displaying Streams, Basins and Catchments for Region 12=

Open ArcMap and use the button to add data. Navigate to the folder where the downloaded data is saved.

=

We will first add the subba= sin and flowlines layers. The NHDflowl= ine.shp shapefile is located in the Hy= drography folder and the Subbasin.shp sh= apefile is located in HydrologicUnits = folder.

Now lets add the Catchment.shp file to the display also.

Recolor the themes if you wish. The res= ult is a map similar to the following:

Use File/Save As to save the ArcMap document as Ex2.mxd (to save your own customized colors).

To Be Turned In: What is the approximate map extent= in decimal degrees of these data? Use the Draw Tools in ArcMap to draw lines on the map showing the 100º W Meridian and the 30º N Parallel. Screen capture the resulting map display and include it in your solution.
Selecting the San Marcos Basin

The Subbasin, Catchment, and NHDflowlines feature classes cover a large region and we only want to work in the San Marcos Basin. We'll use ArcMap to identify the San Marcos SubBasin and to create new feature classes using pertinent portions of the feature classes for Region 12.

(1) Turn off the nhdflowline and catchment themes in the display, and use the Select button from ArcMap tools to visually selec= t the San Marcos basin (see image below). Open the Subbasin layer attribute t= able and press the Selected button.= This will show you the items you have selected. You will see that the San Marcos Basin is [HUC_8 =3D 12100203] is the only highlighted feature.

(2) Make sure that Arc Ca= talog is closed or the next steps won’t work. In ArcMap, Right Click on Subbasin= and select Data/Export Data to produce a new theme.   If you get a message saying you can’t do this, it means that you haven’t shut down Arc Catalog before trying the data export. Close Arc Catalog and repeat the export steps if this happens.

=

Browse inside your geodatabase to the Basemap Feature dataset (you̵= 7;ll have to change the Save as Type to File and Personal Geodatabase feature classes first), name this new feature class as Basin and save it in the geodatabase as a File and Personal Geodatabase feature class.   Don’t save it as a Shapefile, which is the default option you are first presented with.

The program will automatically convert only the selected features.

You will be prompted to whether add this theme to the Map, click Yes. Notice the Basin Feat= ure Class looks identical to the earlier subbasin feature class selection for t= he San Marcos basin, but the new Basin class has only a single feature in i= t. Notice that it carries all the attributes of subbasin.   We are using the term “Basin” here to describe the San Marcos basin in its entirety e= ven though it is a subbasin of the Guadalupe basin, which itself is a part of t= he Water Resource Region 12. In a later exercise in this course, we will delineate Watersheds within the San Marcos Basin using DEM data.

(3) Select Selection <= /b>à Clear Selected Features to clear the selections you made from Subbas= in.

=

Selecting the San Marcos Catchments

We will create a layer that only contains the catchments in the San Marcos subbasin.
Right click on the Watershed feature class in Arc Map and select Zoom to Layer, and turn on the Catchment layer so you can see the Catchments that you want to work with.

Use the selection menu to = Select By Location and select features from the Catchments layer that have their centroid in Basin.

Hit OK to make the selection and close the window.

Now right click on the catchment layer name and select Data/Export Data. Navigate to the directory that contains the geodatabase that was created earlier. Change the save as type to File and Personal Geodatabase feature classes to see the SanMarcos.gdb file and save the f= ile as Catchment in the BaseMap featu= re dataset. Hit OK and add the fe= ature to the map as a layer.

Remove the old catchment laye= r for Region 12 by right clicking it and selecting Remove. Similarly= remove the Subbasin layer for Region 12 so that you only see the San Marco= s Basin.

You may notice one catchment = on the lower edge of the basin that has its centroid in the San Marcos basin but is not actually contained by this basin. Therefore, we must edit it out manual= ly.

Select the catchment shown be= low. Open the attribute table and choose to show Selected.

Now, use the Editor Toolbar to edit this selection. If the Editor toolbar is= not visible, turn it on using the View= menu.

Select Editor/Start Editing to begin an editing session.

Select the Catchment feature class to be edited. Select the catchment to be deleted= by usign the tool in the Editor toolbar, and then right click on that feature and hit Delete.

and you’ll see it disap= pear.

Save Edits th= en Stop Editing.

Selecting the San Marcos Flowlines

Now we can create a layer wit= h just the flowlines in the San Marcos Basin. Repeat the select by location with t= he NHDflowline layer. Select the features from nhdflowline with their centroid in catchments.

This selects all the flowline= s in the San Marcos basin.

Follow the same process to ex= port this data. Save it as Flowline= in the BaseMap feature dataset and add it as a layer to the map. Remove the old nhdflowline.

Now lets look at some summary statistics of the flowlines. = Right click on the LengthKm field and select Statistics

From this display, you can se= e the statistics of the LengthKm of the flowlines. There are 556 flowlines whose aver= age length is 3.39 km and the total length is 1888 km.

To be turned in: How many catchments are there in the San Marcos Basin? What is their average = area in km²? What is the total area of catchments in this basin in km²?   What is the ratio of the len= gth of the streamlines to the area of the catchments (called the drainage density)= in km^-1?

Adding Attributes to the Flowlines

Now we will use the flowline attributes table to symbolize the flowlines based on their mean annual flow= . Add the table flowlineattributesflow.d= bf to your ArcMap display.

Open the attribute table for = the feature class Flowline and sel= ect Options/Add Field. You should hav= e Arc Catalog closed while you are doing this or it may not work.

Name the field Mean _Annual_Flow and make it of the type Double.

Now we will join the Flowline layer with the flowlineattributesflow table base= d on COMID. Right click on the Flowline= layer and select Joins and Relates= /Join.

Say no to creating an index.<= o:p>

Now when you open the Flowline attribute table you will= find the information contained in the flowlineattributesflow table has been join= ed to the existing features. Scroll over to the column labeled flowlineattribu= tesflow.MAFLOWU. This field contains the Mean Annual Flow for each reach. It is estimated by averaging the mean annual runoff over the drainage area above this reach.

We can set the value of our n= ew field Mean_Annual_Flow by using the field calculator. Scroll back to the co= lumn we created, now called Mean_Annual= _Flow, and right click on the column label to select the field calculator.

Set this field equal to [flowlineattributesflow.MAFLOWU].= This populates the Mean Annual Flow field with the appropriate value.

Now we can remove the join by= right clicking on the Flowline featu= re class and selecting Joins and Relates/Remove All Joins.

Now our attribute table for SanMarcos_flowlines has a field called Mean_Annual_Flow with the values populated. We can use this field to symbolize the flowlines. Right click on= Flowlines and select properties. In the properties men= u, select the Symbology tab. Chan= ge the Symbology to display graduated symbols for the Mean_Annual_Flow field and h= it OK.

The result is a map displayin= g the relative flow of the streams and rivers in the San Marcos basin.

To be turned in: the layout of the San Marcos Basin a= nd stream. Add labels to show th= e San Marcos River, the Blanco River and Plum Creek.

Creatin= g a Point Feature Class of Stream Gages

Now you are going to build a new Feature Class yourself of stream gage locations in the San Marcos basin. I have extracted information from the US= GS stream gage data books information about 8 gages in this basin:

T= he location coordinates and flow data can be obtained from the USGS NWIS serve= r, as described subsequently in this exercise.

<= b>(a) Define a table containing an ID and the long, lat coordinates of the gages<= /b>

T= he coordinate data is in geographic degrees, minutes, & seconds. These val= ues need to be converted to digital degrees, so go ahead and perform that computation for the 8 pairs of longitude and latitude values. This is somet= hing that has to be done carefully because any errors in conversions will result= in the stations lying well away from the San Marcos basin. I suggest that you prepare an Excel table showing the gage longitude and latitude in degrees, minutes and seconds, convert it to long, lat in decimal degrees using the formula

D= ecimal Degrees (DD) =3D Degrees + Min/60 + Seconds/3600

R= emember that West Longitude is negative in decimal degrees. Shown below is a table = that I created. Be sure to format the columns containing the Longitude and Latitude data in decimal degrees (LongDD and LatDD) so that they explicitly have Number format with 4 decimal places using Excel format procedures.= Note the name of the worksheet tha= t you have stored the data in. I ha= ve called mine Latlong. Save the = file as an Excel 97-2003 Workbook o= r it will not appear in ArcMap. Close Excel before you proceed to ArcMap.

<= !--[if gte vml 1]>

<= b>(b) Creating and Projecting a Feature Class of the Gages

(= 1) Open ArcMap and the Ex2.mxd file you created in the f= irst part of this exercise. Select= the add data button = and navigate to your Excel spreadsh= eet

<= span style=3D'mso-no-proof:yes'>

Double click on the spreadsheet to identify the individual worksheet within the spreadsheet that you want to a= dd to ArcMap (it’s a coincidence that they have the same name in this example and that is not necessary in general).

<= span style=3D'mso-no-proof:yes'>

H= it Add and your spreadsheet will = be added to ArcMap. Pretty cool!= ! This is the first time we’ve been able to add worksheets directly in ArcMap. Before ArcGIS 9.2 we = had always to save the worksheet as a .dbf file and add that instead. ArcGIS 9.3 recognizes Excel 2007 f= iles but ArcGIS 9.2 does not do that, so if you are using ArcGIS 9.2, you will n= eed to save your Excel file in Excel 2003 format.

<= !--[if gte vml 1]>

N= ow we are going to convert the tabular data in the spreadsheet to points in the ArcMap display.

(= 2) Right click on the new table, LatLong, and select Display XY Data

<= span style=3D'mso-no-proof:yes'>

<= span style=3D'mso-spacerun:yes'> (3) Set the XY Table to latlong= , the X Field to LongDD (or Longitud= e), the Y Field to LatDD (or Latitude)= , Hit Edit to change the spatial coordinate system, and then Import= , and get the coordinate system from the feature dataset Basemap, and you should end up with a display that looks like t= he one below.

<= !--[if gte vml 1]>

H= it OK, to complete it and youR= 17;ll get a warning message about your table not having an ObjectID. Just hit Ok and move on. Hit Ok to add the points and voila= ! Your gage points show up on the map right along the San Marcos River just like they should. Magic.=    I remember the first time I = did this I was really thrilled. T= his stuff really works. I can cre= ate data points myself! If you do= n’t see any points, don’t be dismayed.&n= bsp; Check back at your spreadsheet to make sure that the correct X field= and Y field have been selected as the ones that have your data in decimal degre= es.

C= lick on the point symbol under the legend label latlong event and recolor and resize the points so that they show up more clearly.

W= hat you have created is called an “event” which means that it is a graphical display in the ArcMap window of latitude and longitude points that are stored in a table. It is = not a real feature class yet.

<= !--[if gte vml 1]>

<= span style=3D'mso-spacerun:yes'>   (4) Now, we’ll make a feature cl= ass out of the points.   Right click on the latlong Events layer and select Data/Export Data

<= span style=3D'mso-no-proof:yes'>

A= nd export the data into the Basemap feature dataset as the feature class MonitoringPoint.   Say Yes when you are ask= ed if you want to add the points to your map, and now you’ve got a new feat= ure class in the Basemap feature dataset with your points in the same projectio= n as the other features in Basemap (ArcGIS does the map projection automatically= as part of the data export process). Open the Attribute table of the MonitoringPoint feature cl= ass so that you can see that all the attributes have been correctly translated from the Excel file.

<= !--[if gte vml 1]>

<= span style=3D'mso-no-proof:yes'>

O= pen ArcCatalog and check out your = Basemap feature dataset. The MonitoringPoint feature class now resides there.

(= 5) Save your Ex2.mxd ArcMap docum= ent, and construct a layout to turn in.

= Add Attributes to the Point Feature Class

N= ow we are going to add the USGS gage ID, gage name, and annual discharge for e= ach gage as new attributes in ArcCatalog.

(= 1) Open ArcCatalog (make sure Arc= Map is closed) and navigate to the San Marcos geodatabase that contains your data.=

(= 2) In the Basemap feature dataset, right click on the MonitoringPoint feature class, and click on Properties to open the Feature Cl= ass Properties window. Click on the Fields tab and scroll down to the en= d of the Field Name list. Type the = following three entries:

Field Name

Data Type

USGSID

Text

Name

Text

Flow

Double

<= !--[if gte vml 1]>

<= span style=3D'mso-spacerun:yes'> (3) Click OK and open your A= rcMap document ex2.mxd.

<= b>Adding Data to the Attribute Table

(= 1) In ArcMap right click on the MonitoringPoint feature class and open = the attribute table. Scroll to the right until you see the new fields you have created. Start editing by selecting Editor/Start Editing.

<= span style=3D'mso-no-proof:yes'>

If the Editing Toolbar is not visible it maybe added by selecting View/Tool= bars/Editor.

<= span style=3D'mso-no-proof:yes'>

S= elect Editor/Start Editing and select the San Marcos geodatabase as the ta= rget to be edited:

<= !--[if gte vml 1]>

(= 2) You may now just add the appropriate data values to the table and for = the three attribute fields you added. Continue adding the data values until they are all done.

The following data are needed in the table:

Seq #

Station #

Station Name

Mean Annual Flow (cfs)

1

08170500

San Marcos Rv at San Marc= os, TX

176

2

08173000

Plum Ck nr Luling, TX

114

3

08172000

San Marcos Rv at Luling, = TX

408

4

08172400

Plum Ck at Lockhart, TX

49

5

08171300

Blanco Rv nr Kyle, TX

165

6

08173500

San Marcos Rv at Ottine, = TX

456

7

08172500

Plum Ck nr Lockhart, TX

56

8

08171000

Blanco Rv at Wimberley, T= X

142

<= span style=3D'mso-spacerun:yes'> (3) Select Editor/Stop Editing to finish editing and say Yes when it asks if you would like to save your edit= s. Note that you can only edit tables for which you have write permission (i.e. your own tables not tables in my work area).

Labeling the Gages in View=

R= ight click on the MonitoringPoint f= eature class and select Properties. C= lick on the Labels tab and from the= drop down menu select the label field name to be Name.

R= ight click on the MonitoringPoint feature class again and select “L= abel Features”. You can now create a view like this:

<= span style=3D'mso-no-proof:yes'>

Pretty awesome! If you want t= o move the labels around to customize your map, you can convert the labels to annotation and then they can be individually moved where you want them to b= e:

<= span style=3D'mso-no-proof:yes'>

N= ote that in order to move the labels, you have to open the View/Toolbars/Editor and selected the SanMarcos.gdb geodatabase to edit, and the MonitoringPointAnno = as the feature class to be edited:

<= span style=3D'mso-no-proof:yes'>

T= hen, you can move and change the size of the annotation as you wish. When you are done, say Stop Editing and Save your annotation in its new location. Save the ArcMap doc= ument Ex2.mxd also.

= Creating a Chart and Layout

(1)&= nbsp;         Open ArcMap to create a chart of the mean annual fl= ow of the San Marcos gages. The Mean Annual Flow at the gages is recorded in the column labeled Flow in the att= ribute table. Open the MonitoringPoint attributes table and make a chart= using the tools available in ArcMap. Alternatively, you can export the attribute table to a .dbf file and map the chart in Excel. You can also open the geodatabase tables directly in Excel by using Data/Get External Data and doing a query on the Microsoft Access file that contains the geodatabase. The chart may look something like this

<= br>

(= 2) In ArcMap prepare a layout showing a map of the drainage area, the <= b>graph of its annual flows at each gage and a table of numerical values describing the gages. You can import your Excel chart and worksheet from the Insert/Object... option in ArcMap. If necessary resize the original chart or table smaller so that it can be displayed in the layout. You'll see in the chart that the flow in the San Marcos River at Luling and= Ottine is much higher than in the upstream stations. That is because of the cumula= tive effect upstream at Luling and because Plum Creek joins the San Marcos River just upstream of Ottine.

<= i>To be turned in: a layout showing the base map, chart and data table for the S= an Marcos River flows

= Overlaying the Edwards Aquifer

T= he Edwards aquifer is one of the most critical water resources of Central Texas. It is the main source of water suppl= y for San Antonio, the 10th largest city in the United States. The Edwards aquifer is recharged by infiltration from rivers crossing its outcrop area. To determine where the San Marcos River crosses, the outcrop area, I obtained a coverage of the Edwards aquifer from the Texas Natural Resource Information S= ystem (http://www.tnris.state.tx.us/)

T= he Edwards aquifer coverage from TNRIS is in Decimal Degree coordinates. This = is the Edwards shapefile that you copied from the zip file at the begin= ning of the exercise.

(1)&= nbsp;         Import your Edwards.shp file into the San= Marcos geodatabase. From the Toolbox window in ArcMap, select Conversion Tools à = To Geodatabase à Feature Class to Feature Class= . Although the name of the tool is f= eature class to feature class, it will also convert a shapefile to feature class.<= span style=3D'mso-spacerun:yes'>

(2)&= nbsp;         Choose Edw= ards.shp as the Input Features, the Basemap= feature dataset of the SanMarcos geodatabase as the output location,= Aquifer as the output feature cla= ss name, and leave the rest of the inputs as their default values. P= ress OK.

This will not only do the conversion from shapefile to feature class, but also a= dd the new feature class to your map.

R= ight click on the Aquifer feature class and select Properties. Click on i= ts Symbology tab and Label the theme using the attribute Aquifer. This attribute has three values: 1 for outcrop, 2 for downdip and = 0 for holes within the outer boundary of the aquifer. Classify the values wit= h Unique Value and color them appropriately.

<= br>

<= br> You'll see that as the San Marcos River flows South East towards the Gulf C= oast and it crosses first the outcrop and then the downdip portions of the Edwar= ds aquifer. The downdip region is where the aquifer dips below the land surface and is shielded from the surface rivers by overlying hydrogeological units = of low permeability. The Edwards is a fissured limestone aquifer whose fissures lie along its Southwest to Northeast orientation, so its flow moves in that direction, transverse to the direction of flow in the San Marcos basin. It = is thus quite possible for water to drain from the San Marcos river into the Edwards aquifer and then reappear as a spring further North in another rive= r. Zoom in to the region where the aquifer crosses the San Marcos basin for a closer look.

<= span style=3D'mso-no-proof:yes'>

<= br> To be turned in: Between which two gaging stations does the Edwards aqui= fer outcrop area occur? What is the difference in mean annual flow at these two gages? Comment on these data. Do they seem correct to you?
= Do= wnloading USGS Flow Data

T= here are also other sources of flow data. One of them is real time data via Inte= rnet from the U.S. Geological Su= rvey (http://water.usgs.gov/real= time.html). This data is taken at the gage sit= es every 15-60 minutes and is transmitted to the USGS office every 1 to 4 hour= s. This data relayed using satellite, telephone, and/or radio and can be viewed within minutes on arrival to the office.   Notice the difference between the = flow conditions in September 2002, 2003, 2006 and this September 2007. In 2002, the Northeast was experie= ncing a severe drought while in 2006 it was wetter than normal, and today there is drought in the Southeast and very wet conditions in = Texas. Hydrology is a wonderful phenom= enon – always changing!

<= span style=3D'mso-no-proof:yes'>

<= span style=3D'mso-no-proof:yes'>

<= o:p>

<= span style=3D'mso-no-proof:yes'>

<= !--[if gte vml 1]>

Y= ou can see the effect on streamflow of Hurricane Ike which passed through this region Sept 12-15, 2008!

(= 1) Click on the site http://water.usgs.gov/realtime.html.

(= 2) Once you have looked around a bit click on Texas on the map of the Un= ited States located above. This link will bri= ng you to a web page, which shows real time data for the state of Texas. Click on = a gage shown on the map to display a graph. It’s a bit hard to select stations on this map since you can’t zoom into Texas, but you can see the station name on the bar at the bottom of your web browser. The San Marcos River= at Luling, Texas is station 08172000.

<= span style=3D'mso-no-proof:yes'>

To be turned in: The graph of flow of the San Marcos = River at Luling printed from the NWIS website.   What are the 20%, 50%, and 8= 0% cumulative probability flows for the calendar day on which you do the download? Approximately what % cumulative probability is the flow currently? <= /span>

Summary of Items to be Turned in:

1. What is the approximate map extent= in decimal degrees of these data? Use the Draw Tools in ArcMap to draw lines on the map showing the 100º W Meridian and the 30º N Parallel. Screen capture the resulting map display and include it in your solution.

2. How many catchments a= re there in the San Marcos Basin? What is their average area in km²?&n= bsp; What is the total area of catchments in this basin in km²= ?   What is the ratio of the len= gth of the streamlines to the area of the catchments (called the drainage density)= in km^-1?

3. A layout of the San Marcos Basin and streams. Add labels to show the San Marcos = River, the Blanco River and Plum Creek.

4. A layout showing the base map, chart and data table for the San Marcos River flows.

5. Between which two gaging stations does the Edwards aquifer outcrop area occ= ur? What is the difference in mean annual flow at these two gages? Comment on t= hese data. Do they seem correct to you?

6. The gr= aph of flow of the San Marcos River at = Cuero printed from the NWIS website.   What are the 20%, 50%, and 80% cumulative probability flows for the calendar day on which you do the download?= Approximately what % cumulative probability is the flow currently? <= /span>

Seq #	Station #	Station Name	Mean Annual Flow (cfs)
1	08170500	San Marcos Rv at San Marc= os, TX	176
2	08173000	Plum Ck nr Luling, TX	114
3	08172000	San Marcos Rv at Luling, = TX	408
4	08172400	Plum Ck at Lockhart, TX	49
5	08171300	Blanco Rv nr Kyle, TX	165
6	08173500	San Marcos Rv at Ottine, = TX	456
7	08172500	Plum Ck nr Lockhart, TX	56
8	08171000	Blanco Rv at Wimberley, T= X	142

Exercise 2. Building a Base = Map of the San Marcos Basin

CE 394K GIS in Water Resourc= es University of Texas at Austin Fall 2008

Goals of the Exercise

Computer and Data Requirements

Proc= edure for the Assignment

Selecting the San Marcos Basin

Selecting the San Marcos Catchments

Selecting the San Marcos Flowlines

Adding Attributes to the Flowlines

Creatin= g a Point Feature Class of Stream Gages

= Add Attributes to the Point Feature Class

= Creating a Chart and Layout

= Overlaying the Edwards Aquifer

= Do= wnloading USGS Flow Data

1. What is the approximate map extent= in decimal degrees of these data? Use the Draw Tools in ArcMap to draw lines on the map showing the 100º W Meridian and the 30º N Parallel. Screen capture the resulting map display and include it in your solution.

CE 394K GIS in Water Resourc= es
University of Texas at Austin
Fall 2008