The intention of this exercise is to give you experience applying Arcview to view maps in various commonly used projections, and to introduce you to a few more functions within the Arcview interface, such as the procedure for selecting a class of features for display in a map.
The data needed for this exercise are contained in \exercise\ex2\gisfiles . These data were extracted from sample data sets that are distributed by ESRI along with the code for ArcView 2.1. The part of the exercise concerned with viewing map projections is done with Arcview 2.0 or 2.1 on either a workstation, PC, or MacIntosh platform.
Internet students can download the necessary files.
Password: your e-mail address
(1) Prepare a set of three layouts showing how the world, Africa, and Morocco look in geographic coordinates and in various map projections.
(2) Answer other questions about the analysis that you perform as noted on the instructions in the following pages.
Map projection involves taking data whose spatial coordinates are defined in terms of latitude and longitude on a curved earth surface and transforming those data so that their spatial coordinates are defined in terms of Easting and Northing or (x,y) on a flat map surface. ArcView permits data to be viewed in various map projections but no new data sets are produced in these projections. Arc/Info can produce new data sets in projected coordinate systems but use of Arc/Info for this purpose is not included in this exercise.
To begin this exercise, you need to be working at a machine with Arcview 2.0 or 2.1 operating and have access to the sample data files which are stored in \gisfiles\ex2af . These files include the themes:Afrbord, Cities, Deg30, Latlong, World94.
Start Arcview and open a new View. Add Themes (the button) from the directory \gisfiles\ex2af . Choose World94.shp and Deg30.shp. Drag Deg30.shp below the World94.shp so that the layout of the countries is superimposed on the grid of 30 degree rectangles. Recolor the countries and 30 degree rectangles as necessary. To make the Deg30 rectangles clear and show just their outlines, double-click on this theme in the tool palette, and in the Legend Editor window that opens, double-click on the colored rectangle. In the Fill Palette window that then opens, click on the clear rectangle in the top left corner of the shaded rectangles displayed, then select Apply in the Legend Tool window and the display of the Degree boxes will go to outlines only. To change the name of the view to World in Geographic Coordinates use View/Properties and alter the Name field to the new name. Here is an example of what you will see.
Move the cursor around on the view and you will see a pair of numbers above the view on the toolbar to the right of "scale" that alter as you move the cursor. These give the location of the cursor and from the values displayed you can see that these coordinates are given in decimal degrees of latitude and longitude.
Questions: what is the spatial extent of the view shown in terms of degrees of latitude and longitude? Where is the point (0,0) latitude and longitude located on the earth's surface? What does this location represent?
Make a new View by hitting New in the Project window while the View icon is highlighted. This should result in the creation of a new View window labeled View2. Add the themes World94.shp and Deg30.shp to this view as before.
Click on View/Properties and you will see a window open with options for Projection. Click on the Projection button. Under Projections of the World you'll see a projection Type labeled Robinson. Click OK in the two open windows and you'll see the View transformed to appear in a Robinson projection, which is a relatively new style of map projection for the earth designed to present the whole earth with a minimum of distortion at any location. If you move the cursor over this space, you'll see that the coordinates are now in a very different set of units, meters in the projected coordinate system.
Go back to View/Properties and under Projection Type, click on the arrow to the right of Robinson, which opens a display window, from which you can select Geographic. Click, OK, OK, and the View will be transformed back to the appearance that it had originally.
Go back to View/Properties and reproject the View into the Robinson projection. Here is an image of the world in the Robinson Projection. To label your view World in Robinson Projection like that shown in the picture, use View/Properties to change the Name field, as before.
Create another new View (View 3) by the same procedure as used previously, and add World94.shp and Deg30.shp as themes to it.
Go to the View/Properties sequence and this time under projection Type, select View from Space (the last option in the list of Projections of the World). You'll see a nice 3-D view of the globe as seen from a viewpoint above Massachusetts, USA. If you want to see how the world looks when viewed from above Rabat, Morocco, go back to the projection selection window, click on Custom and then type -7 for the Central Meridian and 32 for the reference latitude (the projection name changes to "Orthographic" when you do this). And there is the world centered on Rabat, Morocco! Change the view name to World from Above Rabat, Morocco using the same procedure as before.
Add the Cities.shp theme to the view, and select You may wish to try looking at the world from a few other places. You can get the coordinates of locations on the earth by viewing earth in the geographic projection. Play around a bit and have some fun!
Here is what a view of the World from Space above Rabat, Morocco would look like.
The Project should now contain three Views of the world: in Geographic coordinates, the Robinson Projection, and the View from Space. Make sure that they are all open. In the Project Window, click on the Layout icon and hit New. This will create a blank layout window. Use the map icon at the right end of the lower tool bar to create a space on the layout for View 1(World in Geographic Coordinates) and add the View to this space. Repeat the Exercise for View2 (World in Robinson Projection) and View3 (World from Above Rabat, Morocco).
Label the Views of the World with the Text Tool in the lower tool bar. If your labeling is too small (the default is 14 point), use Window/Show Symbol Palette to bring up the Palette, click on the button labeled ABC to get the Font Palette and then resize the lettering to perhaps 24 or 36 point. If you want to color the lettering, choose the Paintbrush icon in the Tool Palette, and in the Color Palette, scroll forward from Foreground to Text, then choose the color for the text. Label some of the main meridians and parallels in the geographic coordinate view.
If possible, make a printout of the Layout. Save the Project (File/Save Project As) so that you don't have to recreate it again later if you need it again.
In this part of the exercise, we are going to examine a map projection that could be used for mapping the continent of Africa.
Create a New Project by hitting File/New Project. Save changes to your previous project if necessary before it is automatically closed out. Open a new View. Add the themes Afrbord.shp and Latlong.shp to the View. These are an outline of African countries and a 5 degree grid of latitude and longitude as a line theme. Position the latlong theme above the Africa theme so that you can see the grid overlying the continent. Here is an image of what you should see:
Question: What is the geographic extent of Africa? Give the East and West limits of longitude for Africa and those for the Northern and Southern extent of the continent to the nearest degree. Identify the Equator and use the tool (make afrbord.shp the active theme and double-click on a map polygon with this tool selected) to determine the names of the countries that the Equator passes through in Africa. If we removed a vertical slice out of the world cut along the meridians defining the most Eastern and Western points in Africa, how much of the globe would we have cut out?
The Transverse Mercator projection is formed by projecting earth coordinates onto a cylinder that is tangent to the earth along a meridian of longitude. This is a conformal projection, meaning that small shapes are maintained. The only parameters required to define this projection are the longitude of the central meridian and a reference latitude, although a scale factor, false easting, and false northing may also be specified. Distortion increases as you move away from the central meridian. This projection is commonly used to minimize distortion in displaying land masses that stretch north to south.
Create a new View, View2, and add Afrbord.shp and Latlong.shp to the View as you did previously. Go to View/Properties and ensure that Map Units are labeled decimal degrees since the View that you are looking at is in Geographic Coordinates. Hit Projection, select Custom, and among the projection choices offered, select the Transverse Mercator projection. Choose 20 as the central meridian, click OK, and OK. You can zoom in on Africa to produce an image like the one shown below. Note that the meridian at 20 E is the only straight meridian, all other meridians are curved lines.
The Project should now contain two Views of Africa: in Geographic coordinates, and in the Transverse Mercator projection. Make sure that they are both open. In the Project window, click on the Layout icon and hit New. This will create a blank Layout window. Use the map icon at the right end of the lower tool bar to create a space on the layout for View 1 and add the View to this space. Repeat the exercise for View2.
Label the Views of Africa with the Character Tool (Labeled T in the lower tool bar). If your labeling is too small (the default is 14 point), use Window / Show Symbol Palette to bring up the Palette, click on the button labeled ABC to get the Font Palette and then resize the lettering to perhaps 24 or 36 point. Label some of the main meridians and parallels in the geographic coordinate view.
If possible, make a printout of the Layout. Save the Project (File/Save Project As) so that you don't have to recreate it again later if you need it again.
Make a new project, open a View and add to the View the themes afrbord.shp, latlong.shp, and cities.shp.
To select only Morocco, a special display of the Africa theme can be set up as follows:
([Name] = "Morocco")
If you don't have all the components of the query built correctly, hit Cancel in the Query Builder window and start again to build the query.
Here is an image of Morocco in geographic coordinates.
The latitude/longitude grid displayed is at 5 degree intervals of latitude and longitude. To determine what latitude or longitude a particular line represents, highlight the theme latlong.shp in the Legend bar and use the Information tool in the tool bar. As you click on each line a small display window will give you the record of information about that line. You can use the same tool to determine the names of the cities in cities.shp (remember to make cities.shp the active Theme to make this work).
Questions: What is the geographic extent of Morocco to the nearest degree in North, South, East and West? What are the latitude and longitude of Rabat?
The Lambert Conformal Conic projection is a standard projection for presenting maps of land areas whose East-West extent is large compared with their North-South extent. Although the North-South extent of Morocco is almost as large as the East-West extent, we will use this projection as an example. This projection is "conformal" in the sense that lines of latitude and longitude, which are perpendicular to one another on the earth's surface, are also perpendicular to one another in the projected domain. Parameters that define the Lambert Conformal Conic projection are the central meridian, a reference latitude, and two standard parallels. The central meridian should be through the middle of the region of interest, the reference latitude should be wherever you think the center of a coordinate system could be (usually at the center or below the bottom of the extent of the geographic features). As a general rule, the two standard parallels should be located approximately 1/6 from the bottom and 1/6 from the top of the geographic extent of the mapped features. These guidelines hold for both the Lambert Conformal Conic projection discussed here and the Albers Equal-Area projection described in the next section.
Create a new View (View2), add afrbord.shp and latlong.shp to it, and select only Morocco for display as before.
To view Morocco in the Lambert Conformal Conic projection, highlight the afrbord.shp theme, go to View/Properties, set the map units to Decimal Degrees, and click on the Projection bar, click on Custom and in the Projection Properties window displayed, select Projection: Lambert Conformal Conic. Set the Central Meridian to -7, set Standard Parallel 1 to 29, Standard Parallel 2 to 34.5, and the reference latitude to 25. Click OK at the two display windows to transform the view to the projected domain. Notice how the meridians now fan out from an origin at the center of rotation of the earth (a consequence of using a conic projection centered on the axis of rotation of the earth). The display shown is that which would be produced by cutting the cone up the back side and unfolding the cone so that it lays flat on the table.
Here is an example of the Lambert Conformal Conic Meridians and Parallels
Morocco is a dark dot in the center of the meridians. Use the Zoom tool to highlight Morocco. The Central Meridian used for this projection was 7 W, which would appear as a vertical line, if present, on the display. A closer view of Morocco is shown below.
The Albers Equal Area projection has the property that the area bounded by any pair of parallels and meridians is exactly reproduced between the image of those parallels and meridians in the projected domain, that is, the projection preserves the correct area of the earth though distorts direction, distance and shape somewhat.
Create a new View (View3), add afrbord.shp and latlong.shp to it, and select Morocco as before.
To view Morocco in the Albers Equal-Area projection, highlight the afrbord.shp theme, go to View/Properties, set the map units to Decimal Degrees, click on the Projection bar, click on Custom and in the Projection Properties window displayed, select Projection: Albers Equal-Area Conic. Set the Central Meridian to -7, set Standard Parallel 1 to 29, Standard Parallel 2 to 34.5, and the reference latitude to 25. Click OK at the two display windows to transform the view to the projected domain. The image that you see looks very similar to that produced by the Lambert projection.
If you take a 5 degree box of latitude and longitude, such as one of those shown in the views, the ratio of the East-West distance between meridians to the North-South distance between parallels is Cos (latitude) : 1. For example, at 30 degrees N, Cos(30) = 0.866, so the ratio is 0.866 : 1, at 45 degrees N, Cos(45) = 0.707, so the ratio is 0.707 : 1. In the projected Albers view (View3), the result is that square boxes of latitude - longitude appear as elongated quadrilaterals with a longer base than their top edge. This elongation becomes more evident as you move closer to the poles. You can see this if you zoom out from Morocco. In geographic coordinates, the effect of the real convergence of the meridians is lost because the latitude and longitude grid form a set of perpendicular lines.
The Project should now contain three Views of the Morocco: in Geographic coordinates, the Lambert Conformal Conic projection, and the Albers Equal-Area Conic projection. Make sure that they are all open. In the Project Window, click on the Layout icon and hit New. This will create a blank layout window. Use the map icon at the right end of the lower tool bar to create a space on the layout for View 1 and add the View to this space. Repeat the Exercise for View2 and View3.
Label the Views of Morocco with the Text Tool (Labeled T in the lower tool bar). If your labeling is too small (the default is 14 point), use Window/Show Symbol Palette to bring up the Palette, click on the button labeled ABC to get the Font Palette and then resize the lettering to perhaps 24 or 36 point. Label some of the main meridians and parallels in the geographic coordinate view.
Make a printout of the Layout. Save the Project (File/Save Project As) so that you don't have to recreate it again later if you need it again.
Another one done!!
These materials may be used for study, research, and education, but please credit the authors and the Center for Research in Water Resources, The University of Texas at Austin. All commercial rights reserved. Copyright 1997 Center for Research in Water Resources.